Sanyo PLC-XU110 Owner's Manual

Also see for PLC-XU110: Specifications Service manual

Contents

43Video InputMove the red frame pointer tothe desired image mode andpress the SELECT button.The selected image mode is check marked.Image Select MenuStandardCinemaBlackboard(Green)For viewing with the user preset image mode in the ImageAdjust Menu (see page 44–45).Image1–4Image Select Menu iconSelect the desired image mode from among Dynamic,Standard, Cinema, Blackboard (Green), Image 1, Image 2,Image 3, and Image 4 by pressing the IMAGE button on theremote control.StandardPicture mode adjusted with fine tone.CinemaBlackboard (Green)Image 1–4IMAGE buttonDynamicCinemaImage 1Image 2Image 3Image 4Image Mode SelectionFor the image projected on a blackboard.This mode help enhance the image projected on a blackboard.This is mainly effective on a green colored board, not trulyeffective on a black colored board.For the image projected on a blackboard. See above forfurther description.Blackboard (Green)DynamicDynamicStandardRemote ControlIMAGE buttonDirect OperationFor viewing pictures in a bright room.Normal picture mode preset on the projector.For viewing with the user preset image mode in the ImageAdjust Menu (see page 44–45). This Image memory isprovided in each computer, component, and video inputsource.Press the MENU button to display the On-ScreenMenu. Use the Point 7 8 buttons to move the redframe pointer to the Image Select Menu icon.12 Use the Point ed buttons to move the red framepointer to the desired image mode and then press theSELECT button.Menu OperationFor viewing pictures in a bright room.Normal picture mode preset on the projector.Picture mode adjusted with fine tone.