Sanyo PLV-Z700 Owner's Manual
                                                            | |
Contents
|
25System Menu (Video/S-Video)If the projector cannot reproduce a proper video image, selecta specific broadcast signal format from among PAL, SECAM,NTSC, NTSC 4.43, PAL-M, and PAL-N.Video or S-VideoComponent 1 or Component 2The projector automatically detects the incoming video systemand adjusts itself to optimize its performance.When the video system is PAL-M or PAL-N, select the systemmanually.Use the Point ed buttons to select the Input Menu andpress the Point 8 or OK buttons to access the submenuitems.Use the Point ed buttons to select an input source andpress the Point 8 or OK buttons. The selected item is checkmarked.12When the video signal is connected to the VIDEO or S-VIDEOjacks, select Video or S-video respectively.Menu Operation Input MenuWhen the video signal is connected to the Y-Pb/Cb-Pr/Cr jacks,select Component 1 or Component 2.The projector automatically detects the incoming video signal andadjusts itself to optimize its performance.3 When “Video” or “S-video” is selected, press the Point 8button to display the System Menu.4 Use the Point ed buttons to select the desired system andpress the Point 8 or OK buttons.VideoInputAutoThe currently set itemis check marked.Press the Point 8 buttonto display the SystemMenu.PAL / SECAM / NTSC / NTSC4 43 / PAL-M / PAL-N5 When “Computer” is selected, press the Point 8 button todisplay the Source Select Menu.6 Use the Point ed buttons to select the desired source andpress the Point 8 or OK buttons.Use the Point ed buttonsto select the desiredsystem and press thePoint 8 or OK buttons.QuitExit this menu.Input |
Related manuals for Sanyo PLV Z700 - LCD Projector - 1200 ANSI Lumens
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine