Sanyo PLV-Z700 Owner's Manual

33To store the adjusted data, select Store and press the Point 8 orOK buttons. The User Image Mode Menu appears. Use the Pointed buttons to choose one of the five (5) user image modes andpress the Point 8 or OK buttons. A confirmation box appears.Select [Yes] and then press the OK button.To exit the User Image Mode Menu, go to the Quit icon and pressthe Point 8 or OK buttons. The stored data can be called up byselecting “User image 1 – 5” in the Image Mode Selection onpage 27.StoreTo reset the adjusted data, select Reset and press the Point 8 orOK buttons. A confirmation box appears. Select [Yes] and thenpress the OK button. All adjustments return to their previousfigures. You can also reset the adjusted data by pressing theRESET button on the remote control.ResetPress the Point 8 orOK buttons to store theadjusted data. The UserImage Mode Menuappears.✔Note:• If you change the image mode (see page 27) or turn off thePOWER without storing adjusted settings, all the adjusted settingswill be reset.• When resetting, the adjusted data in Advanced menu will be resetwhether or not Advanced menu in the Setting Menu is “On.” Seepage 37.QuitPress the Point8 or OK buttonsto exit the UserImage ModeMenu.Image AdjustmentChoose one of the five (5) userimage modes with the Point edbuttons and press the Point 8 orOK buttons. The confirmation boxappears.Select [Yes] and then press theOK button.