Sanyo PLV-Z700 Owner's Manual

32COLOR MANAGEMENT LISTClear the check mark ifyou do not want to applythis adjusted color datato the projected image.Select [Yes] to deletethe selected color data.Select the DEL boxif you want to deletethe adjusted data.A confirmation boxappears.COLOR MANAGEMENTCOLOR MANAGEMENT LISTSelect Color management in the Advanced menu and thenpress the Point 8 or OK buttons. The COLOR MANAGEMENTLIST appears. You can store up to eight (8) color managementdata in the list.In the COLOR MANAGEMENT LIST, the adjusted color dataare check marked reflecting the changes in the image. You canchoose whether to apply the data in the list to the image.Clear the check mark if you do not want to apply the data; selectthe check mark and then press the OK button. The check markdisappears.If you want to readjust the color, select a color data box in thelist and press the OK button. The COLOR SELECTION windowappears and you can readjust the color. See below for colorselection.If you want to delete a particular data in the list, select the DELbox and then press the OK button. A confirmation box appears.Select [Yes] and then press the OK button.Press the OK button when selecting the following items.ALL DEL . . . . . . Delete all the data in the list. Press the OKbutton and a confirmation box appears. Select[Yes] and press the OK button.COLOR M. . . . . Go to COLOR SELECTION.EXIT . . . . . . . . . Exit the Color management mode and returnto the Advanced menu. To store the adjusteddata, see “Store” on the next page.Press the MENU button when you want to return to theAdvanced menu.COLOR SELECTIONPress the OK button when “COLOR M.” in the COLORMANAGEMENT LIST is selected. The COLOR MANAGEMENTLIST disappears and the Color management pointer appears.Use the Point ed 7 8 buttons to move the pointer to aspot where you want to adjust the color and then press theOK button. The image freezes and the COLOR SELECTIONwindow appears. (Note that when certain colors are chosen, anexclamation mark is displayed indicating that these colors are notadjustable.)Use the Point ed buttons to select COLOR LEVEL, COLORPHASE, or GAMMA and the Point 7 8 buttons to adjustthem. While adjusting, the changes are reflected in the imageaccordingly. If you press the MENU button while operating thecolor selection, the Color management pointer will be reset.After adjusting, press the OK button to go to the COLORMANAGEMENT LIST.COLOR SELECTIONColor management pointerUse the Point ed 7 8 buttons to movethe pointer to a spot where you wantto adjust the color and then press theOK button. The COLOR SELECTIONwindow appears.Go to the COLOR MANAGEMENT LIST.After adjusting COLOR LEVEL,COLOR PHASE, and GAMMA,press the OK button.To store the adjusted data, exitthe Color management modeand go to “Store” in the Imageadj. Menu (see page 33).Color data boxImage Adjustment