Sanyo PLV-Z700 Owner's Manual

35This projector has the picture screen resize function which enables you to customize the image size.Press the Point ed buttons to select the Screen Menu andpress the Point 8 or OK buttons to access the submenuitems.Use the Point ed buttons to select the desired screen sizeand press the Point 8 or OK buttons. The selected item ischeck marked.12 Screen MenuScreen Size AdjustmentDirect OperationPress the SCREEN button on the remote control to select ascreen size from among Full, Zoom, Normal, Natural wide, andAnamorphic.Menu OperationRemote ControlSCREEN buttonFullFit the image to the screen by expanding the width of the imageuniformly. This function can be used to project a squeezed videosignal at the wide video aspect ratio of 16:9.The selected screen size.Full ➜ Zoom ➜ Normal ➜ Natural wide ➜Anamorphic ➜ Full ➜ • • • •ZoomFit the image to the screen size (16:9 aspect ratio) by expandingthe width and height of the image uniformly.With the input signals other than 1080p, 1080i or 720p, thisfunction is used to project a letterboxed picture (the 4:3 aspectratio picture with a black bar at the top and bottom) at the widevideo aspect ratio of 16:9.When the input signal is 1080p, 1080i or 720p, a letterboxedpicture in a 16:9 screen can be projected by expanding at the widevideo aspect ratio of 16:9.In the Zoom mode, you can also adjust the display range withthe vertical adj. function. See “Vertical adj.” on the next page fordetails.ScreenNormalFit the image to the center of the screen at the normal videoaspect ratio of 4:3.Modify the image to fit the screen size by stretching the image tomake it look natural.When the video signal format is 480i, 575i, 480p, or 575p, the 4:3aspect ratio image is modified to fit the screen size (16:9 aspectratio.)When the video signal format is 1080p, 1080i, or 720p, the 4:3aspect ratio image in 16:9 signals is modified to fit the screen size(16:9 aspect ratio.)Natural wideModify the 2.35:1 aspect ratio image in 16:9 signals to fit thescreen size by stretching the image in a vertical direction. Thisfunction can be selected only when 1080i, 1080p, or 720p signalsare selected.In the Anamorphic mode, you can also adjust the display rangewith the vertical adj. function. See “Vertical adj.” on the next pagefor details.Anamorphic✔Note:• When the video signal format is 480i, 575i,480p, or 575p, the Screen Menu cannot beselected except for Full, Zoom, Normal, Naturalwide.• When the video signal format is 1080p,1080i, or 720p, the Screen Menu cannot beselected except for Full, Zoom, Natural wide,Anamorphic.• When Normal is selected with a computer input,the image is projected at the inputted resolution.• This projector cannot display any resolutionhigher than 1920 x 1080. If your computer’sresolution is higher than that, lower theresolution before connecting to the projector.• The image data other than the 1920 x 1080resolution is modified to fit the screen size ininitial mode.