Sanyo PLV-Z700 Owner's Manual

26HDMI 1 or HDMI 2When the video signal is connected to the HDMI 1 or HDMI 2terminals, select HDMI 1 or HDMI 2 respectively.The projector automatically detects the incoming video signal andadjusts itself to optimize its performance.If the output signal of video equipment and the input signal of theprojector do not match, you might not get an image with the bestquality.If the blacks of the picture appears unclear (too dark or too light),try “HDMI 1 setup” or “HDMI 2 setup” in the Setting Menu onpage 38.When the signal is connected to the COMPUTER connector, selectComputer.RGB (Analog) When the input source is analog coming froma computer connected to the COMPUTERconnector, select RGB (Analog).RGB (Scart) When the input terminal is Scart with a DVDplayer connected to the COMPUTER connector,select RGB (Scart).Source Select MenuComputerInputComputerPress the Point 8 buttonto display the SourceSelect Menu.Use the Point ed buttonsto select the desiredsource and press thePoint 8 or OK buttons.The projector automatically tunes to various types of computersbased on VGA, SVGA, XGA, WXGA or SXGA with its Multi-scansystem and the Auto adj. function (see page 34). If “Computer”is selected as a signal source, the projector automatically detectsthe signal format and tunes to project a proper image without anyadditional setting. (The signal formats provided in this projector isshown on page 56.)QuitExit this menu.✔Note:• When switching from HDMI1 to HDMI2 or vice versa, the signalmay be interrupted for a moment depending on the equipment.Input