Sanyo PLV-Z700 Owner's Manual

30This function can be selected only when Advanced menu in theSetting Menu (see page 37) is set to “On.” You can adjust thefollowing items through this function.Advanced menuIris modeAdjust the lamp aperture. Select from the following options:Mode 1. . Brightness is prioritized over contrastMode 2. . Contrast is prioritized over brightnessFixed. . . . Fixed lamp aperture set in the Iris rangeIris rangeAdjust the upper limit of the lamp aperture (from -63 to 0).✔Note:• Value changes depending on the selected image mode.Auto black stretchEnhance blacks in bright areas of an image. It can be set in 4 steps(Off/Low/Mid/High).Contrast enhancementAdjust the contrast in bright scenes in 4 steps (Off/Low/Mid/High).Transient improvementAdjust the sharpness of image outlines in 4 steps (Off/Low/Mid/High).Color managementAdjust the level, phase, and gamma of any color. You can storeup to eight (8) color management data. For details, see “COLORMANAGEMENT” on page 32.Dynamic gammaSet the level for Dynamic gamma correction. Select from thefollowing options:Off . . . . . Disable dynamic gamma correctionLow . . . . Small correctionMid . . . . . Medium correctionHigh . . . . Large correction✔Note:• One of the above options are displayed depending on the selectedimage mode.Image AdjustmentPress the Point 8 or OKbuttons to access the selecteditem. The adjustment bar isdisplayed.Use the Point 7 8 buttons toadjust the setting values andpress the OK button.If you press the Point d button,the next item can be selected.