User guide Installation7Placing your printerPlace the printer on a solid, flat, surface, ensuringthat the printer is positioned in such a way that itcan not topple, and that there is easy access to thecontrol panel and paper input devices. Also en-sure that there is sufficient space for the printedoutput.If you expect that frequent forward and reversefeeds will occur, you should place the printer asshown in the figure, if possible.The power supply cable may be dam-aged if the paper edges constantlychafe the insulating sheath. The usermust always ensure that there is suffi-cient distance between the power sup-ply cable and the paper.When selecting the printer location, observe thefollowing additional instructions:Never place the printer in the vicinity ofinflammable gas or explosive sub-stances.Do not expose the printer to direct sunlight. If you cannot avoid plac-ing the printer near a window, protect it from the sunlight with a cur-tain.When connecting the computer with the printer, make sure not to ex-ceed the permitted cable length (see Interface specifications,page 112).Ensure sufficient distance between the printer and any heating radi-ators.Avoid exposing the printer to extreme temperature or air humidityfluctuations. Above all take care to avoid the influence of dust.It is recommended to install the printer in a place which is acousti-cally isolated from the workplace because of the noise it mayproduce.STOPSTOP1 20100-102030405060708090CLrm.iso
