User guide The Menu71Right-hand area (Rightzo) If the parameter is On, the print head travels from the right-hand per-foration area (u) towards the center of the paper while the paper ismoving. The Pagewid option must be correctly set in this case, seePaper width (Pagewid) (page 70).Press the Rightzo key (3).Setting options: On/OffDefault setting: OffIf this parameter is On, the print head carriage travels to thecenter of the form while the paper is loaded.Confirm the setting by pressing the Set (1) key. Change to the nextparameter group with the Next key (4).Bidirectional parallelinterface (CX-bid)This parameter sets the parallel interface either to bidirectional or tocompatibility mode.Select the CX-bid menu (3).Setting options: On/OffDefault setting: OnCX-bid = On sets the parallel interface of the printer to bidirectionalmode (IEEE 1284, Nibble mode), e.g. for Windows Plug & Play.CX-bid = Off sets the interface to compatibility mode in order to en-sure reliable operation with special external boxes or print server.Confirm the setting by pressing the Set (1) key. Change to the nextparameter group with the Next key (4).Leftzon RightzoOnlineSetup21 3 4Back NextRightzo=Off *OnlineSetupSet < > Exit21 3 4Paphand CX-bidOnlineSetupBack Next21 3 4CX-bid=On *OnlineSetupSet < > Exit21 3 4
