User guide Printer drivers1611 Select the printer type. Click on OK, then on Next.12 If required, edit the name of the default printer and specify whetheryou wish to use the printer as a default printer by clicking on the rel-evant option. Then click on Next.13 If you are using the printer as a network printer, you have the optionof sharing it with other network users. In this case you must enter anaccess name which will be displayed to the other network users.Then click on Next.14 Specify whether you wish to print out a test page (recommended) byselecting the relevant option and click on Finish. The printer driverwill now be installed.The printer driver only works if the Epson emulation is selec-ted (default setting for parallel interface). For details how toselect Epson emulation, refer to Setting the EPSON Mode (EPS-Mode) (page 86).The printer drivers either support the printer font Draft or DraftCopy, not both. Selection, which kind of draft font is used, hasto be made in the printers Menu mode (see Selecting font (Font),page 49). If you want to switch between print qualities NLQ(Near Letter Quality) and LQ (Letter Quality), you also have tomake this selection in Menu mode.Other operatingsystemsThe printer can also be used with other operating systems such asLinux or Unix. In this case, set the printer to the Epson emulation orIBM emulation for which default drivers are available in most oper-ating systems.
