User guide The Menu69Paper handling (Paphand) The Paphand group of menus improves the possibilities for the trou-blefree printing of paper with properties likely to cause problems(perforations etc.) or paper of poor finish.Put the printer into Menu mode by pressing the Setup key. Press theMenu key. The display shows Print/Macro. Press Next or Back keyuntil the parameter group Paphand/CX-bid appears in the display.Press the Paphand key (2).Select the Head up menu (2).Increasing the print head gap(Head up)With this function you can increase the print head gap before and af-ter the perforation of the form.Setting options: On/OffDefault setting: OffIf the parameter is set to On, the print head gap increases duringform feed and line feed four lines before and after the perforation onthe form (= protected zone). The print head gap is always increasedduring form feeding past the perforation even when feeding takesplace outside the protected zone.Printing is possible in the protected area.Confirm the setting by pressing the Set (1) key.Paphand CX-bidOnlineSetupBack Next21 3 4Head up PagewidOnlineSetupBack Next21 3 4Head up=Off *OnlineSetupSet < > Exit21 3 412234567 81 Top edge of form 5 Protected zone2 Paper transport strip 6 Transport holes3 Bottom edge of form 7 Left-hand area4 Form separation perforation 8 Right-hand area
