User guide The Menu70Paper width (Pagewid) This parameter determines the actual paper width.Press the Pagewid key (3).Setting options narrow printer: From 20 to 80 in 1/10 inch stepsSetting options wide printer: From 20 to 136 in 1/10 inch stepsDefault setting narrow printer: 136/10"Default setting narrow printer: 80/10"(80/136 characters at 10 characters/inch)If Head up = On, the print head moves to the calculated center ofthe paper during the time the paper is moving in the protected zone.If Rightzo = On (see below), the print head moves out of the perfo-ration zone on the right as long as the paper is being transported.Set the printing width rather than the actual paper width.Confirm your settings with the Set key (1) and press the Next key(4) to access the next group of parameters.Left-hand area (Leftzon) If the parameter is On, the print head moves out of the perforationzone (area t) on the left as long as the paper is being transported.The Pagewid setting has no influence (see above).Press the Leftzon key (2).Setting options: On/OffDefault setting: OffConfirm your settings with the Set key (1).Head up PagewidOnlineSetupBack Next21 3 4Pagewid=136/10“*OnlineSetupSet < > Exit21 3 4Leftzon RightzoOnlineSetup21 3 4Back NextLeftzon=Off *OnlineSetupSet < > Exit21 3 4
