User guide The Menu67Setting and activatingoptions (PapOpt)Selection of the optional tractor; see Paperway (page 5). If you setany of these options to Not installed, they will not be displayed in thepaper path quick selection menu.For setting the tractorPress PapOpt (3) key.Press Front2 (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: installed/Not installedDefault Setting: Not installedConfirm the setting by pressing the Set (1) key. Change to the nextparameter group with the Next key (4).Activation of tractors (AutoTra) This parameter only appears if the optional tractor is installed. It reg-ulates the activation of tractors when there is no more paper left inone of them.Press AutoTra (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: Off/T1=T2Default Setting: OffIf an optional tractor is installed and the Off parameter is activated,only the selected tractor is supported (either via the menu or an ESCsequence). If the selected tractor is out of paper, printing stops.If an optional tractor is installed and you select T1=T2, the printer willload paper from the other tractor if the selected one is empty.Confirm the setting by pressing the Set key (1).FFmode PapOptOnlineSetup21 3 4Back NextFront2OnlineSetup21 3 4Back NextInstalled *OnlineSetupSet < > Exit21 3 4AutoTraOnlineSetup21 3 4Back NextAutoTra=Off *OnlineSetupSet < > Exit21 3 4
