User guide The Menu61If you wish to define the form length via standard formats, pressStandard (3) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: DIN A3, DIN A4, DIN A5,DIN B5, DIN B6, DIN C6,Executive 10.5", Letter 11", Fanfold 12",Legal 14", No FormatDefault Setting: Letter 11"Selects the form length by standard formats. Using Standard, differ-ent paper formats can be selected directly, e.g. DIN A4, Legal, Let-ter.The LC display indicates No format if a value is selected by the Linefunction or ESC sequences, which does not correspond to a stan-dard format.Confirm the setting by pressing the Set key (1).First printing position (FormAdj) Sets the first print position of a form in n/72 inch, separately adjust-able for each paper path.The settings made here reduce the height of the printable area.Press FormAdj (3) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: 0/72" bis 220/72"Default Setting: 8/72"An alternative notation for FormAdj is TOF (Top Of Form).Confirm the setting by pressing the Set key (1). Press the Next key(4) to access the next group of parameters.Lines StandardOnlineSetup21 3 4Back NextFanfold 12 *"OnlineSetupSet < > Exit21 3 4Formlen FormAdjOnlineSetup21 3 4Back NextFormAdj= 12/72 *"OnlineSetupSet < > Exit21 3 4
