User guide The Menu65Barcode (Barcode) With this function selected it is posible to print different barcodes andLCP (Large Character Printing).Press Barcode (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: On/OffDefault Setting: OffThe definition and activation is performed by special sequencesthrough the interface. Since this selection is possible for all emulati-ons it must be noted that conflicts in sequence conformity with theselected emulation may occur. (The possible barcodes, LCP cha-racters and the operation of these functions are described in theProgrammer’s Manual).Confirm the setting by pressing the Set key (1).Normal characters and bar-code (Barmode)Allows printing of normal characters on the left and right of the bar-code.Press Barmode (3) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: Secured/UnsecuredDefault Setting: UnsecuredIn secured mode, the space which the barcode characters requireis “protected”. In each line, other barcode or normal characters canalso be printed. These additional characters are printed in the linecurrently being printed and and in the subsequent lines, without af-fecting the barcode which is already being printed. Consequently,normal characters can be printed in every line to the right or left ofthe barcode.Barcode BarmodeOnlineSetup21 3 4Back NextBarcode=Off *OnlineSetupSet < > Exit21 3 4Barcode BarmodeOnlineSetup21 3 4Back NextSecured *OnlineSetupSet < > Exit21 3 4
