Tascam dr-44wl Reference Manual

Also see for dr-44wl: Owner's manual Owner's manual Reference manual

Contents

Tascam dr-44wl Reference Manual Manual pdf 10 page image

10 TASCAM DR-44WL2 – Names and functions of partsRecording screen in the MTR mode1 Display of the dual recording function on/off status (4CHmode only)Blank: dual recording function off: dual recording function on2 Reverb on/off status displayThis icon shows the reverb on/off status.Icon DetailBlank Reverb is offReverb is on (sound effects recording) INTMIC, EXT INReverb is on (SEND status) MIX3 Phantom power supply displayBlank: No phantom power supply: 48V phantom power supplied: 24V phantom power supplied4 Recording status messageThe recording status is indicated in the following icons:Indicator Detail09 Recording standby or recording pausemode0 In recording modeSelf-timer recording activated5 Display of the setting status of the PRE REC or Auto RECfunction (4CH mode only)When the PRE REC function is ON, the icon appears.When the AUTO REC function is ON, the icon appears.6 Filename/song name displayDisplays the file name automatically assigned to therecording file.When there are multiple files in the 4CH mode, only theformat portion of each of the file names and the basicnumber of a recording file are displayed. When a single file isrecorded, its name is shown.When the MTR mode is selected, the name of an openedsong is shown.7 Level meter guide displayThis is a level meter guide for adjusting the input and outputlevels. It is displayed at the “-12 dB” position of the scale.8 Level meterDisplays the input sound level.9 File status displayThe file state is displayed in different ways, depending onthe type of a file to be recorded.: Stereo file status: Status of two mono files0 Elapsed recording timeDisplays the elapsed recording time of a recorded file (hours:minutes: seconds).q Remaining recording timeThe remaining time left on the SD card is shown in hours:minutes: seconds.w Peak decibel (dB) messageDisplays the peak input level in decibel reading.e Auto punch in/out function on/off status or master trackloading status (MTR mode only)No icon: auto punch in/out function off: auto punch in/out function on: master track loadedMenu item listPress the MENU button to open the MENU screen. Menu itemsare as follows:Menu item Function Ref. pageMODE Switch the operationmode of this unit. page 17REC SETTING Make recordingsettingspage 18page 25page 26page 29AUTO FUNCTION Set different recordingfunctions.page 24page 25page 28BROWSE(4CH mode only)SD card file and folderoperations page 32SONG(MTR mode only)Operate songs on thecard. page 34TOOLS Configure settings fordifferent functionspage 15page 47page 48page 54REVERB Configure reverbsettings. page 48POWER/DISPLAY Set the power and thedisplay page 57SYSTEM Various system settings page 55page 56