Tascam dr-44wl Reference Manual

Also see for dr-44wl: Owner's manual Owner's manual Reference manual

Contents

Tascam dr-44wl Reference Manual Manual pdf 57 page image

TASCAM DR-44WL 5713 – Settings and InformationPower and display settings (POWER/DISPLAY)Use the POWER/DISPLAY screen to set the power anddisplay of the unit.Follow the below steps to display the POWER/DISPLAYscreen:1. Press the MENU button to open the MENU screen.2. Using the wheel, select (highlight) POWER/DISPLAYand press the ENTER/MARK or / button.The POWER/DISPLAY screen will appear.3. Use . button and / button, ENTER/MARK buttonand wheel to make settings for different items.The following settings for each item can be made in thePOWER/DISPLAY screen.Auto power save function settingUse the AUTO PWR SAVE item to set the time for automaticturn-off (standby mode), counting from the last operation.Options: OFF (no automatic turn-off ), 3 min, 5 min,10 min, 30 min (default value)Battery type settingsUse the BATTERY TYPE item to set the battery type.This setting is used to display the remaining battery power andto calculate the minimum capacity for normal operation.Options: ALKAL (alkaline batteries, default value),Ni-MH (nickel-metal hydride batteries)Set the voltage value of the phantom powersupplyUse the PHANTOM VOLT item to set the voltage value ofthe phantom power supply to connect an external microphonethat requires phantom power.Options: +24 V, +48 V (default value)NOTEBattery power will be consumed faster when set to +48Vthan when set to +24V.Backlight settingUse the BACKLIGHT item to set the time for automaticturn-off of back-light in battery operation, counting from thelast operation.Options: OFF (turned off ), 5 sec (default value),10 sec, 15 sec, 30 sec, ALWAYS (alwaysturned on)Adjusting the display contrastUse the CONTRAST item to adjust the display contrast.Options: 1 - 20 (default value: 8)Set the peak holdUse the PEAK HOLD item to set the peak display of the levelmeter.Options: OFF, 1 sec (default value), HOLD