Tascam dr-44wl Reference Manual

Also see for dr-44wl: Owner's manual Owner's manual Reference manual

Contents

Tascam dr-44wl Reference Manual Manual pdf 27 page image

TASCAM DR-44WL 274 – Recording8. Use the wheel to set the MP3 format for dual recording.Options: MP3 320k, MP3 256k, MP3 192k , MP3128k, MP3 96k, MP3 64k9. Press the ENTER/MARK button to confirm the setting andenable selection of other setting items.10. Once the setting has been completed, press the 8/HOMEbutton to return to the Home screen.NOTE• The WAV file format is the setting in ordinary recording.• DUAL FORMAT can be selected only when the recordingformat is WAV or BFW, 44.1kHZ and 16 bits or 48 kHz and 16bits.• With dual recording, two tracks can be recorded for a stereofile or one track can be recorded for a mono file. Multiplechannels (tracks) cannot be selected as dual recordingsources.Starting dual recording1. Press the RECORD button to enter recording standby,and use the TRACK/INPUT buttons to select the channels(tracks) that you want to record.2. Press the RECORD button to start dual recording.During dual recording, the recording screen appears asfollows.In the input source display area of the recording screen, theinput levels of the current input source and of the second file fordual recording are shown.Dual recording file namesDual recording allows two files to be created simultaneously.The name of the second file created by dual recording has “_D”added to the name of the file recorded ordinarily.1: Set with the WORD item on the FILE NAME screen.2: Recording file base number3: S is the source file4: Assigned channels( 12 is channels 1/2 and 34 ischannels 3/4)5: D is the dual recording fileCreate cue marks during recordingIn recording or recording standby mode, the DR-44WL cancreate cue marks to a file to quickly locate the marked positionand start playback. (See “How to download and install theexclusive application (TASCAM DR CONTROL)” on page 51.)You can either manually set the cue mark, or automatically setthe cue mark level or time to minimize the operation noise.NOTEThe unit will not move to the cue mark position in recordingor recording standby mode.Manual cue marking during recordingPress the ENTER/MARK button during recording or recordingstandby to create a cue mark.The registered pull-up cue mark no. message will appear at thebottom of the screen display.NOTE• Up to 99 cue marks can be created and stored in each file.• Cue marks that are created during the recording of WAV filein BWF format by this unit are stored in the file. You can usethe cue marks in softwares compatible with BWF format.• MARK SET [xx]* is added to the mark name.* [xx] is a serial number common to all marks.