Tascam dr-44wl Reference Manual

Also see for dr-44wl: Owner's manual Owner's manual Reference manual

Contents

Tascam dr-44wl Reference Manual Manual pdf 21 page image

TASCAM DR-44WL 214 – RecordingSetting channel links (4 CH mode only)Channels 1 and 2, as well as channels 3 and 4, can be linked.When channels (tracks) are linked, their settings on theINPUT SETTING screen are shared.1. Press the INPUT button to show the INPUT SETTINGscreen.2. Press a TRACK/INPUT button to open the INPUTSETTING screen for the linked channels (tracks).3. Using the wheel select (highlight) LINK and press theENTER/MARK or / button.4. Use the wheel to set the channel (track) link.Options: OFF (default value), ON5. Press the ENTER/MARK button to confirm the setting andenable selection of other setting items.6. Once the setting has been completed, press the 8/HOMEbutton to return to the Home screen.NOTELINK can be set or changed even during recordingstandby and when recording.Set the track input (MTR mode only)1. Press the MENU button to open the MENU screen.2. Using the wheel, select (highlight) MODE and press theENTER/MARK or / button.The MODE screen is displayed.3. Press the ENTER/MARK or / button.4. Using the wheel, set the mode to MTR mode and press theENTER/MARK button.Options: 4CH (4 CH mode, default value), MTR (MTRmode)5. Press the INPUT button to show the INPUT SETTINGscreen.6. Press a TRACK/INPUT button to open the INPUTSETTING screen for that track to set its input.7. Using the wheel, select (highlight) INPUT and press theENTER/MARK or / button.INPUT SETTING screen Tr1 display when in MTR modeOption Input destinationOFF No input settingINT L(Track 1 default)Input from right front side of built-instereo micINT R Input from left back side of built-instereo micEXT 1 Input from EXT MIC/LINE IN 1/L jackEXT 2 Input from EXT MIC/LINE IN 2/R jackPress the ENTER/MARK button to confirm the setting andenable selection of other setting items.8. Once the setting has been completed, press the 8/HOMEbutton to return to the Home screen.NOTE• The INPUT setting cannot be used when recording.• The same input option cannot be shared by multipletracks. If an input option that has already been assigned isselected, the track that was originally assigned will be set toOFF.