Tascam dr-44wl Reference Manual

Also see for dr-44wl: Owner's manual Owner's manual Reference manual

Contents

Tascam dr-44wl Reference Manual Manual pdf 46 page image

46 TASCAM DR-44WL9 – MixerThe mixer functions that can be used for setting a built-in effect,right and left positions and volume balance for each channel areavailable.Recording sound can be finely changed by setting these duringmixing down or playback. (See “Mixing down” on page 45.)Setting the mixer1. When the Home screen is open, press MIXER to open theMixer screen.in 4CH modeStereo Link is setMS decoder is used2. Use the wheel to select (highlight) an item you want tochange).3. Press ENTER/MARK button to pop up setting items andsettings on the left.4. Use the wheel to change the setting.Items Options ActionSEND 0 - 100Adjusts the forwarding levelof the selected reverb (See“Reverb function” on page48.).(0: Minimum to 100:Maximum)PAN L12 - C - R12Adjusts the balance betweenthe right and left channels.(L12: Left - C: Center - R12:Right)LEVEL: 0 - 100Adjusts the volume balancebetween the right and leftchannels. (0: Minimum to 100:Maximum)RTN 0 - 100Adjust the total volume of thesignals with reverb appliedsent from the SEND buses ofeach channel (track).5. Press the ENTER/MARK button to return to the originalposition where you can select the position to change thesetting next time.NOTE• Operation is available in any mode when playing back,stopped, paused, or in recording standby or recording.• While the Mixer screen is open, press the 7/9 button toplay back or press 8/HOME button to pause the playback.