Tascam dr-44wl Reference Manual

Also see for dr-44wl: Owner's manual Owner's manual Reference manual

Contents

Tascam dr-44wl Reference Manual Manual pdf 22 page image

22 TASCAM DR-44WL4 – RecordingDELAY settingCorrect a time delay that occurs when the built-in microphonesare far away from an external microphone.1. Press the INPUT button to show the INPUT SETTINGscreen.2. Press a TRACK/INPUT button to open the INPUTSETTING screen for that channel (track) to set itsDELAY item.3. Using the wheel select (highlight) DELAY and press theENTER/MARK or / button.INPUT SETTING screen Tr1 display when in 4CH mode4. Use the wheel to set a value according to the distance of theconnected microphone.Options: 0ms (0m) (default value) to 300ms(103m)5. Press the ENTER/MARK button to confirm the setting andenable selection of other setting items.6. Once the setting has been completed, press the 8/HOMEbutton to return to the Home screen.Set the low-cut filterThe low-cut filter can reduce noise such as offensive wind noisefrom air-conditioners and projectors.1. Press the INPUT button to show the INPUT SETTINGscreen.2. Press a TRACK/INPUT button to open the INPUTSETTING screen for that channel (track) to set itslow-cut filter.3. Using the wheel select (highlight) LOW CUT and press theENTER/MARK or / button.INPUT SETTING screen Tr1 display when in 4CH mode4. Use the wheel to set the cut-off frequency of the low-cutfilter.Options: OFF (default value), 40Hz, 80Hz, 120Hz,220Hz5. Press the ENTER/MARK button to confirm the setting andenable selection of other setting items.6. Once the setting has been completed, press the 8/HOMEbutton to return to the Home screen.NOTELOW CUT can be set or changed even during recordingstandby.