20 TASCAM DR-44WL4 – Recordingphantom power for that jack is OFF. If you connect ordisconnect a microphone while phantom power is beingsupplied, that microphone and this unit could be damaged.• Turn phantom power ON only when using a condensermicrophone that requires phantom power.• Supplying phantom power to some ribbon microphoneswill break them. If you are unsure, do not supply phantompower to a ribbon microphone.• When using USB bus power, the unit might not be able tosupply phantom power depending on the computer. If thisoccurs, use the dedicated AC adapter (GPE053B) suppliedwith the unit instead.• Some condenser microphones will not operate whenphantom power is set to +24V.• Do not connect or disconnect the AC adapter when usingphantom power. Even when the battery were inserted inthe unit, the power might be cut off, causing data beingrecorded to be damaged or lost.Settings in the “INPUT SETTING”screenThe contents of the INPUT SETTING screen displayed bypressing the INPUT button vary depending on which mode tobe selected between 4CH mode and MTR mode.INPUT SETTING screen Tr1 display when in 4CH modeINPUT SETTING screen Tr1 display when in MTR modeNOTEWhen a channel (track) link is turned on, the link statusshown at the bottom of the INPUT SETTING screenwill change.INPUT SETTING screen Tr1 display when in 4CH mode
