Tascam dr-44wl Reference Manual

Also see for dr-44wl: Owner's manual Owner's manual Reference manual

Contents

Tascam dr-44wl Reference Manual Manual pdf 48 page image

48 TASCAM DR-44WL10 – Useful functions10. Once tuning has been completed, set SOUND to OFFand press 8/HOME button to return to the Home screen.Metronome function (compatible withV1.10)Metronome operates when the METRONOME screen is open.1. Press the MENU button to open the MENU screen.2. Using the wheel, select (highlight) TOOLS and press theENTER/MARK or / button.TOOLS screen appears.3. Use the wheel to select METRONOME and press theENTER/MARK or / button. Exec appears selected forthe METRONOME item.4. Press the ENTER/MARK button to open theMETRONOME screen.Set the following items on the METRONOME screen.TEMPOSet speed between 20 - 250 (BPM).(default value: 120)BEATSet beat between 1 - 9 (default value: 4)This will accent the first beat.SOUNDYou can set the metronome sound to CLICK, STICKor BELL. (default value: CLICK)LEVELSet the metronome volume between 0 and 100.(default value: 50)5. Use the wheel to select the item to set and press the ENTER/MARK button. This shows the parameters for the item to beset.6. Use the wheel to select the value. Press the ENTER/MARKbutton to confirm it and enable selection of other settingitems.7. Repeat steps 5 and 6 as necessary.8. Press the 7/9 button to start the metronome. Press the7/9 button to stop the playing metronome.9. Once the setting has been completed, press the 8/HOMEbutton to return to the Home screen.Reverb functionA reverb is incorporated into this unit.When recording or practicing, the input signal can be reverbedor the playback signal can be reverbed during playback.When reverb function is ON, the icon will appear at thetop of the home screen.REVERB iconSetting the reverb function1. Press the MENU button to open the MENU screen.2. Using the wheel, select (highlight) REVERB and press theENTER/MARK or / button.The REVERB screen is displayed.The REVERB screen has four setting items.REVERB:Set the reverb on/off status (default value: OFF).TYPE:See the reverb type from the pre-set items. See (See“How to download and install the exclusive application(TASCAM DR CONTROL)” on page 51.) for more detailson reverb types.SOURCE:You can select input/output source to be reverbed fromthe following: (default value: MIX)SOURCE (options) DetailMIX (default value)Enabled for SEND:Reverb can be added to theoutput sound.The recorded sound is notaffected.INT MICEnabled for input:Reverb can be added to the soundinput from the built-in mic.Sound can be recorded withreverb added.EXT INEnabled for input:Reverb can be added to the soundinput from external mics anddevices.Sound can be recorded withreverb added.