TASCAM DR-44WL 5513 – Settings and InformationView information (INFORMATION)Use the INFORMATION screen to view various types ofinformation about this unit.Follow the below steps to display the INFORMATIONscreen:1. Press the MENU button to open the MENU screen.2. Using the wheel, select (highlight) SYSTEM and press theENTER/MARK or / button.SYSTEM screen appears.3. Use the wheel to select INFORMATION and press theENTER/MARK or / button.Exec appears selected for the INFORMATION item.4. Press the ENTER/MARK button to open the INFORMATIONscreen.The INFORMATION screen has the following pages.5. Use the wheel to change the page.The following information appears on each page.PROJECT page (4 CH mode only):Displays information about the currently loaded audio file.CARD / SYSTEM page:Displays information on the inserted SD card, systemsettings and firmware version of the unit.File information page (PROJECT) (4 CH modeonly)The PROJECT page displays information on the currentlyloaded audio file.TITLE/FILE1-4Shows the file name.If an MP3 file has ID3 tag title information that informationappears.FORMATShows the audio file type.For WAV and BWF files, bit length, stereo/mono, and samplingfrequency (Hz) also appear.For MP3 files, the bit rate (kbps), CBR (constant bit rate) or VBR(variable bit rate) type, and sampling frequency (Hz) also appear.(CBR: Constant Bit Rate, VBR: Variable Bit Rate)DATEDate of file creationTIMETime of file creationSIZEFile sizeCard and system information page (CARD/SYSTEM)CARD and SYSTEM pages display information on theinserted SD card, system settings and firmware version of theunit.TOTAL MUSICDisplays the number of playable files in the music folder.TOTAL FOLDERDisplays the total number of folders in the music folder.TOTAL SIZEShows the total SD card capacity.USED SIZEDisplays the amount of used capacity on the SD card.REMAIN SIZEDisplays available free space of the SD card.System Ver.Displays the system's firmware version.Wi-Fi Ver.Displays the Wi-Fi firmware version.