Making calls with multiple lines 125Making calls with multiple linesYou can use your OpenStage 60/80 as a multi-line phone. If you have any ques-tions regarding how to configure your OpenStage phone as a multi-line phone,please contact your administrator.The following is a description of the telephony scenarios for multi-line phones.To facilitate comprehension, you should familiarise yourself with the enhancedtelephony application and how to use the line keys beforehand. Furthermore,you can specify individual settings for your multi-line telephone. Refer to the fol-lowing sections for a detailed description of the individual components:• Introduction to multi-line phones Page 14• Lines and line keys Page 24• Multi-line telephony interface Page 38• Individual settings Page 148Incoming callsDepending on your individual settings, you will be notified of incoming calls.Accepting calls for the primary lineIn this case, the telephone behaves in the same way as a single-line telephone.See Page 51 and Page 99.Answering a call via a Bluetooth headsetT Press the flashing key for the main lineorJ Press the answer key on the headset to answer the call.Accepting calls for secondary linesPrerequisite: The secondary line is configured on your multi-line telephone.Using the handset^ Lift the handset.[ Conduct call.The line that rings is automatically selected. If calls are ringing on morethan one line, you will be connected to the line that has been ringing thelongest.
