Video function 181Video functionYou can connect a USB camera to your OpenStage 60/80 so that during a callyou can see the other call partner, assuming he or she has also connected acamera, and vice versa (see Page 34).The video function is deactivated by default Page 184) because it is not yetfully supported by all telephone systems.Prerequisite: A suitable USB camera is connected and the video function hasbeen approved by the administrator and activated by you ( Page 184).Activating and deactivating the function temporarilyYou can activate and deactivate the video function temporarily via the contextmenu in idle mode.Select and confirm the option shown in the context menu to deactivate.or. Select and confirm the option shown in the context menu to activate.Activating and deactivating a function with a keyYou can configure a "Video on" key to monitor the status of the video function andrespond quickly (see Page 92). This is useful in the following situations for ex-ample:• If the phone is already ringing and you want to quickly activate/deactivate thevideo function before answering the call.• The video status can be identified immediately from the key even if the phoneis in idle mode, the display is switched off or the screensaver is active.S Press the "Video on" program key. The key illuminates and the video function isactivated. The video function can be deactivated by pressing the key again.Video offVideo on
