16 Engineer programming via the keypadUser Profiles154Vanderbilt Installation & Configuration Manual A6V1027695901.05.201616.20 User ProfilesSee also Adding / Editing User Profiles [➙ 187]16.20.1 AddTo add user profiles to the system:The creator must be a user profile type MANAGER.1. Scroll to USERS PROFILES > ADD. The option NEW NAME is displayed. Press SELECT.2. Enter a customized user profile name and press ENTER. The keypad confirms that the new user profile has been created.16.20.2 EditTo edit user profiles on the system:1. Scroll to USER PROFILES > EDIT.2. Press SELECT.3. Edit the desired user profile setting shown in the table below.CHANGE NAME Edit the name of the profile if required.CHANGE AREAS Select the areas relevant to this profile.CALENDAR Select a configured calendar or NONE.RIGHT Enable or disable system features for this profile. See UserRights [➙ 187].DOOR Select the type of access available to this profile for theconfigured doors. Options are NONE, NO LIMIT orCALENDAR.SITE CODE Enter a site code for all cards using this profile.16.20.3 DeleteTo delete user profiles on the system:1. Scroll to USER PROFILES > DELETE.2. Scroll through the user profiles to the required profile.3. Press SELECT You are prompted to confirm deletion.
