Engineer programming via the browser 17Using the Fast Programmer313Vanderbilt Installation & Configuration Manual A6V1027695901.05.20162. Press Next.3. Click Continue Anyway. At the end of the installation process, a window indicates that theinstallation process is complete.4. Click Finish.For Windows 7 You have administration privileges. SPCPro must be installed on the Windows 7 PC. Connect the Fast Programmer to a USB interface on the PC. The drivers are installed automaticallyView SPC Fast Programmer Open the Windows menu Start > Control panel > System > Device Manager. The Fast Programmer driver will be listed under the Ports (COM & LPT)directory as SPC USB Fast Programmer (COM X) (X = com port number).17.12.3 Fast Programmer File OperationsController and peripheral firmware upgrades and custom language imports may bedone using the Fast Programmer and SPC Pro.17.12.3.1 Accessing the Fast Programmer using the Keypad1. Enter Full Engineer and scroll to UTILITIES > FAST PROGRAMMER.2. Press SELECT.3. Scroll and select the desired option:DATA FROM PANEL Select desired file from list.DATA TO PANEL Select desired file from list.DELETE FILES Select desired file from list.FIRMWARE UPGRADE The panel searches for a valid controller firmware file. Once it findsthe firmware file, it will allow the user to select it and upgrade thepanel.PERIPHERAL UPGRADE The panel searches for a valid peripheral firmware file. Once it findsthe firmware file, it will allow the user to select it and upgrade thepanelLANGUAGE UPGRADE A list of the language files available on the Fast Programmer isdisplayed. Select the language required and press SELECT toimport the file.17.12.3.2 Accessing the Fast Programmer using the Browser1. Enter Full Engineer in browser programming and select the File programmingpage.2. Click Fast Programmer. The options to upload and download files are displayed.
