Engineer programming via the keypad 16Set Date/Time157Vanderbilt Installation & Configuration Manual A6V1027695901.05.20162. Scroll to the desired programming option:ENABLE X-10 To enable or disable the X-10 functionality on the system.DEVICES To add, edit, delete or test X-10 devices.LOGGING To enable or disable the X-10 logging.16.23 Set Date/TimeThe date and time can be manually entered on the system. The time and dateinformation is displayed on the keypad and browser and is used on time-relatedprogramming features.1. Scroll to SET DATE/TIME and press SELECT. The date displays on the top line of the display.2. To enter a new date, press the required numeric keys. To move the cursor tothe left and right, press the left and right arrow keys.3. Press ENTER to save the new date. If an attempt is made to save an invalid date value, the text INVALIDVALUE is displayed for 1 second and the user is prompted to enter a validdate.4. To enter a new time, press the required numeric keys. To move the cursor tothe left and right, press the left and right arrow keys.5. Press ENTER to save the new time. If an attempt is made to save an invalid time value, the text INVALIDVALUE is displayed for 1 second and the user is prompted to enter a validtime.16.24 Installer TextThis setting allows the engineer to enter system information and engineer contactinformation.1. Scroll to INSTALLER TEXT and press SELECT.2. Scroll to the desired programming option:SYSTEM NAME Used to help identify the system; use a clear and descriptive name forthe installation.SYSTEM ID Used to help identify the installation when connected to a centralstation (max. 10 digits).INSTALLER NAME Used for contact purposes.INSTALLER PHONE Used for contact purposes.DISP. INSTALLER Setting to display installer details can during the idle state.The installer contact details programmed in these menu options should also beentered on the keypad pull-down label on completion of the installation.16.25 Door ControlThis option allows you to control all the doors of the system.
