17 Engineer programming via the browserSPC Home164Vanderbilt Installation & Configuration Manual A6V1027695901.05.20164. Enter the following:- User ID: user or engineer name- Password: User or Engineer PIN.5. Select a language in which to display the browser screens. The defaultlanguage setting ‘Auto’ will automatically load the language assigned to thisuser ID.6. Click Login.Default settings for WEB server addressConnection IP address Web serverEthernet 192.168.1.100 (default)RS232 192.168.2.1 (fixed)Backup Modem / RS232 192.168.3.1 (fixed)Primary Modem 192.168.4.1 (fixed)USB 192.168.5.1 (fixed)17.5 SPC HomeThe SPC Home page has a System Summary tab, Alarms tab and Video tab.17.5.1 System SummaryThe System Summary tab is divided into the following three sections: System: shows the status of all areas, active system alerts and warnings andinformation for the system. Areas: shows the status of each area defined on the system with up to 20alarm events. You can set or unset an area and the area status displays here. Inhibits and Isolates: Lists all the isolated zones and allows you to deisolate orbypass before setting.