Keypad user interface 12SPCK620/62395Vanderbilt Installation & Configuration Manual A6V1027695901.05.2016 To move the position of the cursor one character to the left and rightrespectively, press the left and right arrow keys. To exit from the feature without saving, press the BACK menu key. To save the programmed setting press ENTER or OK.Entering textIn Text Entry mode, both alphabetic characters (A-Z) and numeric digits (0 – 9) canbe entered. To enter an alphabetic character, press the relevant key the required number oftimes. To enter a language specific special character (ä, ü, ö…) press button 1 tocycle through the special characters. To enter a space + special characters (+, -./[ ]…) press button 0. To enter a digit, hold the relevant key down for 2 seconds and release. To move the position of the cursor one character to the left and rightrespectively, press the left and right arrow keys. To exit from the feature without saving, press BACK. To save the programmed setting press ENTER or OK. To change the case of an alphabetic character, press the up/down arrow keyswhen the character is highlighted by the cursor. To toggle between upper and lower case for all subsequent characters, pressthe hash (#) key. To delete character to the left of the cursor, press the star key(*).Selecting a programming optionIn navigation mode, the Engineer/User selects one of a number of pre-definedprogramming options from a list. To scroll through the list of options available for selection, press the up anddown arrow keys. To exit from the feature without saving, press BACK. To save the selected option, press SAVE or OK.12.2 SPCK620/62312.2.1 IntroductionThe Comfort keypad is a wall-mounted interface that allows: Engineers to program the system through the Engineer Programming menus(password protected) and to set/unset the system; a user can control thesystem on a day-to-day basis. Users to enter User Programming menus (password protected), and to performoperational procedures (set/unset) on the system. (Please refer to theSPC620/623 User Manual for more details of user programming)The SPCK620 is equipped with soft keys and large graphical LCD for easyoperation. The functionality can be enhanced with key switch expander SPCE110or indication expander SPCE120.The SPCK623 is equipped with a proximity card reader (125 kHz EM 4102) foreasy user access, soft keys, large graphical LCD and voice annunciation support.The functionality can be enhanced with key switch expander SPCE110 orindication expander SPCE120.
