3-5Seats, restraints and interiorTo fold rear bench seat 3, pull bothoutboard seatback release leversdownwards simultaneously, foldseatback forwards and down ontoseat cushion.Do not allow passengers to sit onfolded seatbacks, or place anyunrestrained loads on them.Restoring rear seatbacksRaise seatback and push back to itsoriginal position. Ensure seatbacklatches into place by pushing top ofseatback and pulling it forwardsagain.Pull detached connector latch plate ofcentre rear seat belt from roof holderslot and insert in connector, with thearrows aligned. Ensure the latch plateand connector audibly engage.Release outboard rear seat beltsfrom their respective belt holders.Seat beltsThree-point seat beltThe front and rear seats are equippedwith three-point seat belts withautomatic retractors and lockingdevices, allowing freedom of bodymovement when the vehicle moves ata constant speed, although thespring-tensioned belts are always asnug fit.The belt has a “vehicle sensitiveretractor” which is designed to lockduring heavy acceleration ordeceleration in any direction.
