9-6Driving and operatingIf the battery is not the cause of thefault, release selector lever asfollows:This procedure is for emergency useonly. If repeated use of this procedureis necessary, or the procedure doesnot work as described, seek theassistance of a workshop.Manual transmissionReverse: with the vehicle stationary,wait 3 seconds after declutchingbefore engaging gear. If the geardoes not engage, set the lever inneutral, release the clutch pedal anddepress again; then repeat gearselection.When driving, do not use the clutchpedal as a foot rest; this will causesubstantial clutch wear.1. Apply the parking brake.2. Switch off engine then turnkey to ignition switch positionACC or ON.3. Push SHIFT LOCK buttonthen move selector lever.
