< cut top 2" cut 1">DIIIIIIIIHHHHHHHHIIIIIIIIIIIIIOperator Guide 3-7SETTING THE PRINTER EMULATION ANDDEVICE ADDRESSYou may need to change the printer emulation orprinter device address settings at a laterdate. Changing the printer emulation anddevice address does not require removing thetwinax interface card from the printer.Procedures for changing the printer emulationor device address are included in this section.All other interface card configuration changesrequire the removal of the card from theprinter and should be done only by your Xeroxservice representative.NOTE: The coaxial default settings for theprinter device address and printer emulationcan only be set through the FSL Function.Refer to theXerox Coax Command Reference forinstructions and a complete listing of coaxprinters the 4219/MRP and 4215/MRP can emulate.XEROX 4219/MRP Mid Range Systems PrinterXEROX 4215/MRP Mid Range Systems Printer
