< cut top 2" cut 1">DIIIIIIIIHHHHHHHHIIIIIIIIIIIIIG-8Paper FactsFollow the paper specifications outlined inTable G-2 when selecting label stock.Table G-2Label SpecificationsLabel Properties SpecificationFace Sheet Must meet specifications inFusing All adhesives, liners,facestocks and other materialsused in the label constructionmust be compatible with theheat and pressure of the fusingprocess. Materials must notdiscolor, melt, offset materialConstruction Total construction caliper mustnot exceed 0.0070 inches (0.18TransparenciesTable G-3 summarizes the specifications toconsider when selecting transparencies.Table G-3Transparencies SpecificationsTransparenciesPropertiesSpecificationThickness 0.110 mm 3.9 to 4.5 milsCuttingDimension+/- 0.7 mm 0.031 inchCutting angle 90° +/- 0.2°XEROX 4219/MRP Mid Range Systems PrinterXEROX 4215/MRP Mid Range Systems Printer
