< cut top 2" cut 1">DIIIIIIIIHHHHHHHHIIIIIIIIIIIIIOperator Guide 2-29without using the control panel or remotesoftware commands.*PS/PCL Sensing is thefactory default.NOTE: The printer type for the Other I/Omust be set to*PS/PCL Sensing.F Standard (STD) PostScript--with thissetting, the printer recognizes only thestandard PostScript page descriptionlanguage to describe the appearance of aprinted page. Some of the 256 charactersused by PostScript are interpreted ascontrol functions only and cannot betransmitted as data. The control functionsare:— End of job— Status (e.g., printer idle)— Abort (e.g., cancel)— Xon— XoffF PCL 5--with this setting, the printerrecognizes only the PCL 5 command set fordefining a page, selecting fonts, etc.F Binary Communications Protocol (BCP)PostScript--allows any of the 256 possible8-bit values to be transmitted as data andallows certain characters to also specifycontrol functions, such as:— End of job— Status (e.g., printer idle)— Abort (e.g., cancel)— Xon XEROX 4219/MRP Mid Range Systems PrinterXEROX 4215/MRP Mid Range Systems Printer
