< cut top 2" cut 1">DIIIIIIIIHHHHHHHHIIIIIIIIIIIII4-58PrintingThe Xerox Twinax and Coax Interface Configuration ReportsThe Twinax and Coax Interface ConfigurationReports provide information on how the printeris configured to operate within a twinaxial orcoaxial environment.The functions listed on the reports refer tothe settings of the FSL (Function Select viaLine) options that are used to control thespecific features of the twinax and coaxemulations. The use of FSL commands allows youto select options and features on your 4219/MRPand 4215/MRP that are not available on theprinters that are emulated.The use of the FSL commands is documented intheXerox Twinax Command Reference and theXerox Coax Command Reference.The Firmware version information printed at thetop of the configuration report is usefulinformation if you need to report a problem toXeroxThe Xerox IPDS - Settings PrintoutThe IPDS - Settings Printout contains theFirmware Version #, the amount of installedmemory, and whether the installed interface istwinax or coax.The IPDS Setup section provides the followinginformation on how the printer is configured toXEROX 4219/MRP Mid Range Systems PrinterXEROX 4215/MRP Mid Range Systems Printer