< cut top 2" cut 1">DIIIIIIIIHHHHHHHHIIIIIIIIIIIIIOperator Guide G-5Table G-1Paper SpecificationsPaper SpecificationBasis Weight 16 to 28 pound (60 to 135 gsm)Grain Long grainMoisture 4% to 6% by weightFurnish(Composition)100% chemical wood pulp and/orAcid Content 5.5 pH minimumAsh Content Not to exceed 10%Opacity 85% minimumBrightness 83% minimumCaliper 3.0 to 7.0 milsCurl In ream: flat within 0.3 inch(8mm)Cut EdgeConditionsCut with sharp blades with noFinishing Cut sheet to +/- 0.031 inch ofnominal, +/- 0.2° squareFusingCompatibilityMust not scorch, melt, offset orrelease hazardous emissions whenheated to 200° C (392° F) for 0.1Packaging Moisture-proof ream wrapSmoothness 60 to 250 Sheffield (roughersurfaces tend to reduce imageStiffness 1.6 to 7.5 machine direction/0.6to 3.5 cross direction (Taber)Surface 12 minimum wax pick (Dennison)ElectricalPropertiesSurface Resistivity: 2.0 to 15 x1010 ohms/sq. (conditioned at 23°C and 50% relative humidity)Volume Resistivity: 1.2 to 15 xXEROX 4219/MRP Mid Range Systems PrinterXEROX 4215/MRP Mid Range Systems Printer
