Safety Notes• Never remove covers or guards that are fastened with screws. There are no operatorserviceable areas within these covers.• Never locate the equipment near a radiator or any other heat source.• Never push objects of any kind into the ventilation openings.• Never override or "cheat" any of the electrical or mechanical interlock devices.• Never operate the equipment if you notice unusual noises or odors. Disconnect the powercord from the electrical outlet and contact your local Xerox/Fuji Xerox Service Representativeor Service Provider immediately.Do not attempt any maintenance procedure that is not specifically described in thedocumentation that is supplied with your copier/printer.• Do not use aerosol cleaners. The use of cleaners that are not approved may cause poorperformance of the equipment, and could create a dangerous condition.• Use supplies and cleaning materials only as directed in this manual. Keep all of thesematerials out of the reach of children.• Do not remove covers or guards that are fastened with screws. There are no parts behindthese covers that you can maintain or service.• Do not perform any maintenance procedures unless you have been trained to do them by anauthorized local dealer or unless a procedure is specifically described in the user manuals.This product will produce ozone during normal operation. The ozone produced isheavier than air and is dependent on copy volume. Providing the correct environ-mental parameters as specified in the Xerox installation procedure will ensure thatthe concentration levels meet safe limits.If you need additional information about ozone, please request the Xerox publica-tion Ozone by calling 1-800-828-6571 in the United States and Canada. In othermarkets please contact your authorized local dealer or Service Provider.Maintenance InformationOzone Safety Information
