493.1 Setting up Communication ParametersDescription of Each ItemThe contents of [H/W CONFIG] and [SYSTEM PARAMETER] are shown below.Displayed Item DescriptionH/W CONFIG RAM TOTAL Displays the capacity of the memory mountedon the printer.S E G M E N TMEMORYDisplays the capacity of the area in whichintermediate data is stored during printprocessing.WORK MEMORY Displays the capacity of the area used forrunning the controller software.FRAME MEMORY Displays the capacity of the image memory(the area in which images developed out intobit maps are stored.)HARDDISK Displays the model number of the hard diskon which input data is spooled.S Y S T E MPARAMETERSPOOL IN HD Displays the method in which data is storedon the hard disk.[OVERFLOW] Stores intermediate data thatexceeds the capacity of thememory on the hard disk.[ALWAYS] Stores all intermediate dataon the hard disk.Refer to "3.2 Setting up the SystemParameters" for further details (page52).
