159 Chapter 5 Setup Using the Printer Control Panel5.5 ReprintingThis function reprints the file that was most recently printed.It is possible to specify the number of copies to be printed within a range of 1 to 99.Operation Procedure1 Press the < > key with [OFFLINE PLOT]displayed on the parameter selection screen.2 Press the < > key.3 Press the < > key.4 Select the number of copies to be printed (1 to99) with the use of the < > and < > keys, andthen press the key.Press the < > key once it has been set.5 Press the key when [SET:to Print.] isdisplayed.The file will be reprinted accordingly.Reprinting is not possible with the Xerox 6030 WF or Xerox 6050 WF if a copyoperation is performed after a print operation.In order for reprinting to function, you must have a job saved in memory.Refer to "2.2 Operation from the Printer Control Panel" for detailed instructions onprinter control panel operations (page 22).Move the cursor to the right and left withthe use of the < > and < > keys.MENUOFFLINE PLOTOFFLINE PLOTREPLOTREPLOTPrinted CopiesPrinted Copies06 *REPLOTSET : to Print.
