71.4 Switching the Power On and Off1.4 Switching the Power On and OffBoth the scanner and the Printer are equipped with their own independent powerswitches. It is necessary to ensure that the Circuit Breaker Switch is set to ON in order toswitch the power of the Printer on and off with the use of its own independent powerswitch. Power will not be consumed when the Circuit Breaker Switch is off, even if thePrinter’s power plug is plugged into the power source. Switching On the Power[Operation]1 Set the Remote Switch to [Connect]. Refer to1.3 Main Components and Their Function.2 Ensure that the Scanner Power Switch is set toON.Never switch off the power while printing is in progress. Failure to observe thismay result in paper jamming in the higher-temperature areas of the machine.W h e n t h e R e m o t e S w i t c h i s s e t t o[Connect], and the Scanner PowerSwitch is set to ON, the Main PowerSwitch controls power to the Printer andScanner.Scanner PowerSwitch
