102 Chapter 4 Basic Machine OperationsMedia MarginSets the top, bottom, left and right margin values for determining input sizes.+ values represent margins outside of the paper size, and – values represent marginsinside the paper size. The size that includes (excludes) these margins is established as theinput judgment size.Settings The settings for this function are as follows.Setting ExampleThe paper margin settings are determined in accordance with the following for input dataconsisting of 300 x 420 mm.These settings are only valid when the [Input Options] - [Size] parameter has been setto [AUTO].Menu Item DescriptionMarginX Sets the left and right margin values within a range of –99 to 99 mm.The default settings is [5 mm].MarginY Sets the top and bottom margin values within a range of –99 to 99 mm.The default settings is [5 mm].MEDIA MARGIN Input JudgmentSize DescriptionWhen both X and Yh a v e b e e n s e t t o+10 mmA3: 307 × 430 mmA2: 430 × 604 mmAs the input data is smaller than A3, theA3 size is determined. When printing isactually performed on A3 paper (297 ×420), 3 mm of data width will be cut.When both X and Yhave been set to –10mmA3: 287 × 410 mmA2: 410 × 584 mmAs the input data is larger than A3, the A2size is determined. When printing isactually performed on A2 paper (420 ×594), a margin will be located at the top,bottom, left and right.Input judgment size after papermargins have been addedInput judgment sizewith no paper margins
