DOCUCOLOR 12 USER GUIDE 4–5 BASIC COPYING1234567Full ColourThe Full Colour option combines all four dry ink(toner) colours (black, cyan, magenta, andyellow). You should select the Full Colour optionwhen the document contains colour and black, asin Figure 4. In this mode, output is produced atapproximately 12 copies/prints per minute.KEY POINT: Gold, silver, and fluorescent colourscannot be copied accurately on this copier/printer.The dry inks (toners) do not contain the metallicparticles necessary to accurately reproduce goldand silver colours or the fluorescent propertiesthat are required to reproduce fluorescent colours.3 Pass ColourThe 3 Pass Colour option combines the threecolours of dry inks (cyan, magenta, and yellow),as illustrated in Figure 5. You should select the 3Pass Colour option when the document containsvery little black, or when Process Black isacceptable over a true reproduction black, such asis used with photographs. Process Black is acombination of equal amounts of the three dryinks (toners).BlackThe Black option should be selected when thedesired output is a black and white copy. Blackand white copies can be made from anydocument. When you select Black, the copier/printer will use black dry ink (toner) only, as inFigure 6.With the Black option, the copier/printer produces36 copies per minute when it uses 8.5 x 11 inch(A4) paper that is fed long edge first.Figure 4: Example of Full ColourFigure 5: Example of 3 Pass ColourFigure 6: Example of Black
