Specifying input parametersUsing LCDS Print Description Language 2-31The following sections describe the syntax of the commandparameters and explain their options.PCC ADVTAPESpecifies whether or not the carriage control advances to a newpage when two successive channel skip parameters are issuedwith no intervening print.For example, on most printers, the actions PSK1 (Print and Skipto Channel 1) followed by SK1N (Skip to Channel 1, Do NotPrint) cause a blank page to be output. However, on a 1403printer, these actions do not produce a blank page.Syntax [ac:] PCC ADVTAPE = {YES | NO}OptionsDefault No defaultPCC ADVTAPEparameter: pointto noteSK1P (skip to channel 1 and print) followed by a second SK1Presults in a page transition because printing occurred on the firstpage, even if only blanks were output.PCC ASSIGNSpecifies printer carriage control exceptions to a default table(refer to the PCC DEFAULT parameter description).Syntax [ac:] PCC ASSIGN = {(byte, ccln) | (byte, (ccln1 [, ccln2] [, ...])}OFFSET Location of record length field Y N NPOSTAMBLE Length of extraneous data at end of record Y N NSTRUCTURE Input record structure Y N NTable 2-31. Summary of PCC command parameters (Continued)Parameter Specifies Online Offline DJDETable 2-32. PCC ADVTAPE parameter options and definitionsOption DefinitionYES Specifies that multiple skips are honored.NO Specifies that multiple skips result in only one skip action being taken.
