Using Dynamic Job Descriptor Entries (DJDEs)Using LCDS Print Description Language 5-5DJDE operator information pagesThe specification OPRINFO=YES in the JDE specifies that theDJDE records will be printed and sent to the output bin at thenext page transition after an END command. The DJDE recordsare printed on a separate page from the report data. However,no page formatting occurs and DJDEs in long records aretruncated at the end of the physical page boundary.You can use comments in the DJDE for operator notification oroutput routing instructions in conjunction with the OPRINFOparameter. These information pages are printed and delivered tothe bin regardless of the OPRINFO parameter if the DJDEcontains an error, unless you disable the information pages onthe user interface Queue Manager windows.Messages onOPRINFO pages• Error messages. Error messages are printed on theOPRINFO pages, close to where the errors occurred. Thesemessages indicate syntax errors and unsupported DJDEs,and give the initial character position of the invalid text stringor DJDE coding.• Missing END command or page boundary. The followingmessage is automatically printed on an OPRINFO page atthe end of a report if the END parameter or a page boundaryis not detected:***MISSING END COMMAND OR MISSING PAGE BOUNDARY***The following conditions produce the message.– No END parameter is found in the DJDE.– No complete page boundary was found before the end ofthe report; that is, at the end of report there were someDJDEs that had not yet been applied.Duplex processingof OPRINFO pagesWhen the system is printing duplex, the text for OPRINFO pagesin printed only on the front side of the sheet. Each OPRINFOpage is processed as duplex page with a blank back. The blankside is counted as a printed sheet by the system in its statisticsfor the duplex report.In a job for which OPRINFO was specified, if DJDEs areincluded at the page boundary of the front side of a duplex page,the DJDE data skips the back side of the sheet and is printed onthe front of the next sheet.