Using Dynamic Job Descriptor Entries (DJDEs)Using LCDS Print Description Language 5-47OptionsIRESULT DJDESpecifies what the result will be when objects that are imagedwith different inks overlap.Type Page orientedSyntax IRESULT = {DEFAULT | BLACK | COLOR}OptionsIRESULT DJDE: points to note• For monochrome printers, the COLOR and BLACKparameters produce identical results (black).• The color that results from overlapping objects may be onlyblack or only colored for an entire page. For example, a pagecannot have red text printed over a black background andalso black text printed over a red background.Table 5-36. INVERT DJDE options and definitionsOption DefinitionFRONT Specifies page inversion on front sides.BACK Specifies page inversion on back sides.BOTH Specifies page inversion on both front and back sides.NONE Specifies no page inversion.Table 5-37. IRESULT DJDE options and definitionsOption DefinitionDEFAULT Specifies that the ink that was set as the system default IRESULT ink willoverride when two different colored pixels overlap. The default IRESULT inkmay be black or colored.BLACK Specifies that, when two objects that are imaged with different inks overlap,and black and colored pixels coincide, the resulting pixel is black.COLOR Specifies that, when two objects that are imaged with different inks overlap,and black and colored pixels coincide, the resulting pixel is colored.
