Specifying print format parameters4-88 Using LCDS Print Description LanguageOptionsDefault No defaultOUTPUT XSHIFTSpecifies whether or not the image of the form and data on apage is to be shifted downward or upward (thus changing the xcoordinate of the logical page origin) and if so, by what values.XSHIFT is used to shift the image of the data downward orupward (as a long edge feed page is viewed in portraitorientation) to accommodate predrilled stocks, binding, finishing,edgemarking, and short-edge binding.Syntax OUTPUT XSHIFT = {YES | NO | value}OptionsDefault No defaultTable 4-80. OUTPUT UNITS parameter options and definitionsOption Definitionsize An integer value constant that defines the number of dots in a user definedunit (UN).When used to compute the position of a graphic, the result is rounded tothe nearest dot.Table 4-81. OUTPUT XSHIFT parameter options and definitionsOption DefinitionYES Specifies that the page image will be shifted up or down.NO Specifies that no X-image shift will occur.value An integer that specifies a shift amount on the front and back sides of a page.The shift is upward on a portrait oriented page when a positive value isspecified, and downward when a negative value is specified. (Each dot is 1/300of an inch.)The allowable range is 80 to –80.
