Specifying print format parameters4-10 Using LCDS Print Description LanguageDefault Built from the JDL name by adding “.JDL” to the name.ACCT DEPTparameter: pointto noteThe department name (sc) is printed on the accounting sheet,and is entered into the accounting log for the report.ACCT USERSpecifies the delivery destination of the one-page accountingsummary for each report. This page is always printed in thesame mode (duplex or simplex) as the report.Syntax ACCT USER = {BIN | TRAY | BOTH | NONE}OptionsDefault BINACCT command: points to note• If the report completion code on the accounting page is otherthan Completed, an accounting page is delivered to the tray,even if USER=NONE is coded. This is done to notify you of apossible report integrity problem.• Accounting information is accumulated at processing time,not during printing. If the report does not completesuccessfully, use the Customer Accounting feature to obtainprinting status.ACCT command exampleACCT USER=BOTH, DEPT=’MARKETING’;The command example above specifies that after each report isprinted, an accounting page is delivered to both the output binand sample tray.Table 4-13. ACCT USER parameter options and definitionsOption DefinitionBIN Directs an accounting page to the output bin.TRAY Directs an accounting page to the sample tray.BOTH Directs an accounting page to the output bin and the sample tray.NONE Specifies that no accounting page is delivered.
