Xerox DocuPrint 4517 User Manual

Contents

C o n t r o l P a n e l M e s s a g e sC h a p t e r 6 : T r o u b l e s h o o t i n g v 6-7***** The printer is in power on diagnostics.ACTION: None, if there is no failure during power on diagnostics. After otherdiagnostic messages, the final message will be the one that the printeris online and waiting for data.Any Tray Paper needs to be loaded in any tray, for a PostScript job.ACTION: Load paper of the size requested in the bottom line of the display intoany tray that supports the requested size. After loading the front trayor Envelope Feeder you may need to press Enter .Both Cards FailPlease RemoveThe upper and lower font/macro cards have failed and can no longer be used.ACTION: Remove the cards and install new cards.Both Cards OutReplace OriginalThe upper and lower Xerox PCMCIA font cards were removed while the printerwas offline, but the cards were still being used by the software application.ACTION: To clear the error message and resume printing, reseat the cards. PressOnline . On completion of the print job, you can take the printeroffline and remove the cards.Card Err. bothPower Off & OnBoth the upper and lower Xerox PCMCIA font/macro cards were removed whilethe printer was online.ACTION: Power OFF the printer, then power it ON.Card Err. bothReplace OriginalBoth card slots have the wrong Xerox PCMCIA font/macro cards in them. The cardmay contain fonts, macros, or code.ACTION: Take the printer offline and replace the cards formerly in the slots.Card Write Error An error has occurred while the printer tried to write to the Xerox PCMCIAfont/macro card.ACTION: Press Enter .Clear Paper Path A paper jam has occurred. The message alternates with a message that specifiesthe location of the jam.ACTION: See Table 6.4 on page 6-30.Close BinN The bin numbered N is pulled out.ACTION: Close the bin.Table 6.2 Control Panel messages (continued)Message Description/Corrective ActionTable 6.2 Page 2 of 22hapter6.frm Page 7 Friday, July 11, 1997 8:19 PM